Showing 1–40 of 54 results
These engine intake filters for the Aston Martin DB7 Vantage are OEM items from Aston Martin.
This product is sold as a pair. Two intake filters are included per order.
This is a Garage Sale listing – scroll down for more information.
OEM thermostat, housing seal, and O-ring for many Aston Martin V12 engines.
This package includes:
This is a Garage Sale listing – scroll down for more information.
These clamps secure your catalytic converters (“cats”) to the midpipes that follow them in the exhaust system.
The OEM clamps are sold as a pair. One order will include two clamps.
Scroll down for additional ordering and shipping information.
OEM catalyst gaskets! These are the gaskets that sit between your exhaust manifolds (AKA “headers”) and catalysts. These fit most Gaydon-era Aston Martins.
These are sold as a pair – one order contains two gaskets.
Scroll down for additional ordering and shipping information.
This OEM item from Aston Martin is the clutch inhibitor switch for the Aston Martin DB9, DBS, and V8 / V12 Vantage with a manual transmission.
If your Engine Start button doesn’t change lighting or start your engine when you push in your clutch pedal, this could be the problem! Replacing it is fairly easy to do yourself and only takes a few minutes.
Scroll down for additional ordering and shipping information.
An essential part of your V8 Vantage’s ignition system, these can have a serious impact on your engine’s performance if they go bad. These aren’t too hard to replace, and I recommend doing it at the same time you replace your spark plugs.
These fit the 4.3L and 4.7L engines of the V8 Vantage. Available individually or as a pack of 8.
Scroll down for additional ordering and shipping information.
This engine mount is an OEM item from Aston Martin. It is designed for the Gaydon-era V8 Vantage coupe.
Sold individually. Order two if replacing both engine mounts.
Scroll down for additional ordering and shipping information.
These are the bushings used to hang the exhaust mid-pipes from the chassis. The bushings can wear out over time, allowing the mid-pipes to move more than they should, which could lead to exhaust leaks, noises, or other issues.
These are sold as a pack of 2. Only one order is needed per car.
Scroll down for additional ordering and shipping information.
OEM ceramic exhaust tip isolators! These fit most Gaydon-era Aston Martins.
These are sold as a full set – one order contains isolators for both exhaust tips.
Scroll down for additional ordering and shipping information.
The FEAD belt is a maintenance item on the V12 engines. Like any “serpentine” belt, it should be replaced once its service life has expired.
Scroll down for additional ordering and shipping information.
Front-End Accessory Drive (FEAD) Belt (AKA, serpentine belt) for the 2005-2018 Aston Martin V8 Vantage.
This FEAD belt is the updated version for use with the updated idler pulley.
My DIY guide for replacing the idler assembly and FEAD belt on a V8 Vantage can be found here.
Scroll down for additional ordering and shipping information.
OEM Fuel tank gasket for most Gaydon-era Aston Martins (DB9, DBS, V8 Vantage, V12 Vantage, Rapide, etc).
Scroll down for additional ordering and shipping information.
OEM Aston Martin air filters for most 2nd Century cars (DB11, DBS Superleggera, New Vantage, etc).
These are sold as a pair, so you only need one order per car.
Scroll down for additional ordering and shipping information.
OEM Aston Martin air filters for most Gaydon-era cars (DB9/DBS, V8/V12 Vantage, Rapide, Virage, etc).
Doing the job yourself? Check out our DIY Guide to show you how it’s done!
These are sold as a pair, so you only need one order per car.
Scroll down for additional ordering and shipping information.
These Aston Martin intake manifold badges look just like the wings badges for the hood and trunk, but smaller. They have a self-adhesive back so they can be stuck to just about any flat surface. For example, my buddy Dan had one fixed to the ski slope of his V8 Vantage S as a little extra touch for his interior, which I thought was a fantastic idea – check out the picture in the product images.
Scroll down for additional ordering and shipping information.
MAF Sensor for most Gaydon-era Aston Martins (DB9, DBS, V8 Vantage, V12 Vantage, Rapide, etc).
These OEM sensors are sold individually, but I recommend replacing them as a pair to ensure their readings are comparably similar.
Scroll down for additional ordering and shipping information.
Motul makes some awesome fluids, and their engine oil is a great alternative to the OEM oil. It’s fully-synthetic and meets or beats all factory requirements.
This engine oil is suitable for Aston Martin’s naturally-aspirated 5.9L V12 and AMG-based 4.0L twin-turbo V8 engines that require 0w40 engine oil. It is not suitable for the naturally-aspirated 4.3L or 4.7L V8 engines that require 10w60 engine oil.
Motul makes some awesome fluids, and their engine oil is a great alternative to the OEM oil. It’s fully-synthetic and meets or beats all factory requirements.
This engine oil is suitable for V8 Aston Martin engines that require 10w60 engine oil. It is not suitable for the V12 engines that require 0w40 engine oil.
OEM donut-style exhaust gaskets! These are gaskets that are positioned just ahead of your muffler. These gaskets fit most Gaydon-era Aston Martins.
They are are sold as a pair – one order contains two gaskets.
Scroll down for additional ordering and shipping information.
These are the spring bolts used to secure the muffler to the mid-pipes.
Typically only the bolts themselves need to be replaced and the springs can be reused. If the springs aren’t re-usable, they’re also available.
These are sold as a pack of 4. One order will replace all four bolts and/or springs used for the muffler of one car.
Scroll down for additional ordering and shipping information.
Downstream O2 sensor for most Aston Martin V12 engines.
These are OEM items from Aston Martin and are sold individually. There are two upstream and two downstream sensors per car, and I suggest they be replaced in pairs (both upstream at the same time, both downstream at the same time).
Scroll down for additional ordering and shipping information.
Downstream O2 sensor for the 2005-2016 Aston Martin V8 Vantage S / N430 / GT. Click here for the standard V8 Vantage.
These are OEM items from Aston Martin and are sold individually. There are two upstream and two downstream sensors per car, and I suggest they be replaced in pairs (both upstream at the same time, both downstream at the same time).
Scroll down for additional ordering and shipping information.
Downstream O2 sensor for the 2005-2016 Aston Martin V8 Vantage. Click here for the V8 Vantage S / N430 / GT.
These are OEM items from Aston Martin and are sold individually. There are two upstream and two downstream sensors per car, and I suggest they be replaced in pairs (both upstream at the same time, both downstream at the same time).
Scroll down for additional ordering and shipping information.
Upstream O2 sensor (AKA, HEGO sensor) for most Aston Martin V12 engines.
These are OEM items from Aston Martin and are sold individually. There are two upstream and two downstream sensors per car, and I suggest they be replaced in pairs (both upstream at the same time, both downstream at the same time).
Scroll down for additional ordering and shipping information.
Upstream O2 sensor (AKA, HEGO sensor) for the Aston Martin V8 Vantage S / N430 / GT. Click here for the standard V8 Vantage.
These are OEM items from Aston Martin and are sold individually. There are two upstream and two downstream sensors per car, and I suggest they be replaced in pairs (both upstream at the same time, both downstream at the same time).
Scroll down for additional ordering and shipping information.
Upstream O2 sensor (AKA, HEGO sensor) for the Aston Martin V8 Vantage. Click here for the V8 Vantage S / N430 / GT.
These are OEM items from Aston Martin and are sold individually. There are two upstream and two downstream sensors per car, and I suggest they be replaced in pairs (both upstream at the same time, both downstream at the same time).
Scroll down for additional ordering and shipping information.
OEM Oil Change Kits for the AMG-sourced 4.0L twin-turbo V8 engine. This kit has everything needed for an oil change except the oil, which is sold separately.
Doing this job yourself? Check out my DIY Guide!
Scroll down for additional ordering and shipping information.
Oil change kit for:
2005-2008 Aston Martin V8 Vantage
2008 Aston Martin V8 Vantage N400
Scroll down for additional ordering and shipping information.
Oil change kit for:
2009-2018 Aston Martin V8 Vantage
2011-2018 Aston Martin V8 Vantage S / N430 / GT
2017-2018 Aston Martin Vantage GT8
Scroll down for additional ordering and shipping information.
Oil change kit for the 5.2L twin-turbo V12 engine used in the DB11, DBS Superleggera, and other Aston Martins since MY2017.
Scroll down for additional ordering and shipping information.
Oil change kit for:
2005-2012 Aston Martin DB9
2008-2012 Aston Martin DBS
2010-2012 Aston Martin Rapide
2011-2012 Aston Martin Virage
Scroll down for additional ordering and shipping information.
Oil change kit for:
2013+ Aston Martin DB9
2014+ Aston Martin Rapide S
2013+ Aston Martin Vanquish / S
2014+ Aston Martin V12 Vantage S
Scroll down for additional ordering and shipping information.
Oil change kit for the 2010-2013 Aston Martin V12 Vantage.
Click here for the 2014+ V12 Vantage S.
Scroll down for additional ordering and shipping information.
This is the threaded adapter that the oil filter screws onto. On rare occasions, the oil filter and oil filter can get stuck together and won’t come apart. If that happens, the adapter will come out of the engine so the oil filter can still be removed without damaging the engine. But, it also means the adapter may need to be replaced.
This is an OEM item from Aston Martin.
This product is sold individually, and only one is needed per car. The product image shows two, so that both the front and back of the adapter can be seen.
Scroll down for additional ordering and shipping information.
This is an OEM Positive Crankcase Ventilation (PCV) Valve for the 2005-2018 Aston Martin V8 Vantage.
Scroll down for additional ordering and shipping information.
These brackets allow you to remove your Aston Martin’s engine intake air boxes while still keeping the intakes securely in place. This exposes the filters to additional air while also making replacing the filters during maintenance extremely easy! They fit the V8/V12 Vantage, DB9/DBS, Rapide, and Virage.
See my Air Box Removal DIY Guide for instructions for installing these brackets.
Sold as a pair. Only one order is needed per car.
Scroll down for additional ordering and shipping information.
NOTE: The image shown is for demonstration purposes only. Redpants is not affiliated with or endorsed by Aston Martin.
Add a personal touch to your Aston Martin with door sill plaques from Redpants! These plaques are a direct replacement for the original plaques installed on the vehicle’s door sill scuff plates. Use your own text and even logos to make it your own!
Made of titanium with various color options, including black and gold, or as bare titanium.
Sold as a pair, only one order is needed per car. Order with a Redpants Engine Plaque for a complete set!
This is a Made-to-Order product. It is made to order based on customer specifications. Please scroll down for additional ordering and shipping information.
NOTE: The image shown is for demonstration purposes only. Redpants is not affiliated with or endorsed by Aston Martin.
Add a personal touch to your Aston Martin with an engine plaque from Redpants! This plaque is a direct replacement for the original plaque installed on the vehicle’s engine bay center cover (AKA radiator shroud or “slam panel”). Use your own text and even logos to make it your own!
Made of titanium with various color options, including black and gold, or as bare titanium.
Sold individually, only one order is needed per car. Order with Redpants Door Sill Plaques for a complete set!
This is a Made-to-Order product. It is made to order based on customer specifications. Please scroll down for additional ordering and shipping information.
COMING SOON!! This product will be returning to production soon. I’ll be making announcements via my blog, newsletter, and Instagram.
Want to keep your V8 Vantage’s engine as clean as possible? This oil catch can kit can help by reducing the amount of oil burned during the combustion cycle. The result is a cleaner air/fuel mixture, which means better fuel economy, less power loss, and lower carbon buildup over time.
Fits all 2005-2017 V8 Vantages, including 4.3L, 4.7L, V8VS, and V8VGT. Does not fit V12 cars.
Scroll down for additional ordering and shipping information.
OEM spark plugs for the Aston Martin V8 Vantage, ready to install!
Doing this job yourself? Check out the Redpants DIY Guide!
These are sold in a pack of 8, so only one order is needed per car.
Scroll down for additional ordering and shipping information.
